|
| |
| |
 |
Asmaco Crack Filler |
 |
|
|
|
|
|
|
|
|
|
|
ASMACO crack filler is water based one component ready mixed putty generally used to fill cracks and holes in a single application. It uses a superior perfomance ultra light weight formulation with excellent filling charectristics. |
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
ASMACO Crack fill has thixotropic, non-sagging consistency and will not shrinkor cracks on curing. It has excellent adhesion to wood, wood laminates, MDF, wall board, masonry, plaster etc....
| Properties |
Value |
| Appearance |
Light weight putty like |
| |
|
| Colour
|
White |
| Specific
gravity |
0.36 ± 0.01 |
| Odour |
Mild acrylic / ammonia |
| Full cure |
72 Hrs Min. (may increase if humidity is high) |
| Water resistance |
Excellent |
| Application Temperature |
50 Deg F - 112 Deg F |
| Paintability |
Excellent |
| Shrinkage |
NIL |
|
|
|
|
| |
|
| |
Surface must be dry & free from dust, dirt, oil, grease, loose paint or plaster. |
| |
Mix the filler thoroughly (5ml of water to 250ml of filler and stir well to get desired consistency. |
| |
Use putty knife \ Blade to press crack fill firmly into the surface to be filled or repaired. |
| |
Recommended to over paint when used on exterior surfaces. |
|
|
|
|
| |
|
| |
Apply
the usual hygienic measures. For detailed
information refer to Material Safety Data
|
 |
Use with adequate ventilation . |
| |
Keep out of the
reach of children. |
| |
Store out of direct sunlight , heat and keep away from oxidizing agents. |
|
|
|
|
|
|
